5.
DEVICE STATUS
5.1 Stand-by mode
5.2 Logging mode
The device‘s power status is indicated by pulses of the square
LED:
3 pulses:
Battery charge is 75% to 100%
2 pulses:
Battery charge is 50% to 75%
1 pulse:
Battery charge is 25% to 50%
No pulse (but periodic blinking of the
IR-interface LED indicating
that the device is switched on):
Battery charge is less than 25%
Each single motion detection is indicated by a flash of the
reversed triangle:
This can be turned off if the device‘s default settings are changed
via software configuration. Additionally an indication for the
device‘s power status can be turned on. If this is the case the
square LED flashes each time the waitstate period is passed as
long as the battery charge is more than 25%.
Page - 7 -
