Copyright © 2003-2005 InfoSight Corporation All Rights Reserved
Page 3 of 39
Optical/Laser Safety
INVISIBLE LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 1 LASER PRODUCT, USING
A CLASS 4 EMBEDDED LASER (5 W, 10.57 – 10.63
µ
m)
The laser beam Exits the Final lens 5 inches from the tag
Never attempt to operate the Laser Tag Marker without the protective covers in place.
Never attempt to override any of the safety interlocks on the tag printer.
Never attempt to dismantle or repair the tag printer. In case of malfunction contact a Infosight service
representative.
Any of the actions mentioned above may result in
permanent eye or skin damage
. Refer to Laser Safety
((page 30)
for more information on laser safety.
Labels / Warnings
Caution, Laser Radiation – See Appendix A ( Page 30)
Warning label located on the front and top of the main cover:
CLASS 4 INVISIBLE LASER
RADIATION WHEN OPEN
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
Warning label located above the rating plate on the back of the Laser
Marker:
CLASS 1 LASER PRODUCT
Environmental
Conditions
The LabeLase® Printer is intended for Indoor use only. Altitude up to 6500
feet, operating temperature 40 to 100 degrees F, 80% maximum relative
humidity, rated 100-240Vac 50/60 HZ, 5 Amps, pollution degree 2
CAUTION
If this printer is not used in the manner specified by this manual, the
safety features provided may be insufficient.
