INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - [email protected] - 09 05 04 205 12
2
User guide
To ensure this product is correctly installed and properly used, we highly advise you to read
this user guide very carefully.
1 . I N T R O D U C T I O N
This series is a compact and totally pure sine wave interactive UPS, and is designed for
critical applications and environments, such as desktops, servers, workstations, and
other networking equipment. This model is available in 750, 1000, 1500, 2000, and
3000VA output ratings. This series protects your sensitive electronic equipment against
power problems including power sags, spikes, brownouts, line noise, and blackouts.
This series has a ‘two-in-one’ design; it can be placed either in a 2U Rack or Tower. The
front panel of the UPS includes LED indicators and
four push buttons (Power Switch,
UPS Test/Silence, Configure, and Enter) that allow you to easily monitor, configure and
control the UPS’s AC line-in, notification of site wiring faults and output load status. It also
includes four LED bar graphics (Load/Battery Level Indication); two status indications (On
AC, On Battery); five alarm indications (Overload, Over Temperature, Site Wiring Fault,
Battery Fault, Self Test Failure). A push button on the front panel allows you to silence
the AC fail alarm and UPS self test sequence initializing as well. The UPS case for 750 ~
2000VA is made of plastic and the 3000VA case is made of metal.
This series is powered by the AC mains power supply via AC outputs using receptacles
on the rear panel. Communication and control to the unit is available through serial or
USB ports located on the rear panel. The serial port supports direct communication with
a server. The communication protocol for the serial ports complies with genuine RS232
interfaces.
2 . M A I N C H A R A C T E R I S T I C S
•
Microprocessor control guaranteeing high reliability
•
On Line Performance High Frequency High Density
•
User replaceable design for 1500VA or above
•
Selectable and line-sensitive output range
•
Cold start-up capability
•
Built-in dry contact/RS-232/USB communication port
•
SNMP allows for web-based remote or monitoring management
•
Enables extended runtime with scalable external battery pack for 1500VA or above
•
Overload, short-circuit, and overheat protection
•
Rack/Tower 2 in 1 Design
•
19” rack mount available for all models
