inform DSP FLEXIPOWER SERIES, Руководство пользователя

Страница: 51 / 52

46
Appendix -2: Technical Specifications
Tower Model FP1105 FP1106 FP1108 FP1110 FP3110
Power (kVA) 5 6 8 10 10
Power (kW) 4,5 5,4 7,2 9 9
INPUT
Voltage Tolerance ( @ full load )
180~280VAC 320~485VAC
Frequency 45 ~ 65 Hz
Phase/Wire Single Line + N Ground
Three Line +
N Ground
Power Factor Up to 0.99 at 100% Linear Load
OUTPUT
Voltage Window
220/230/240VAC (Selectable)
Voltage Adjustment 0%; ±1%; ±2%; ±3%
Voltage Regulation ±1%
Power Factor 0.9
Wave Form Sine Wave
THD
v
THD<3% (at Full Linear Load)
Frequency Stability ±0.2% (Free Running)
Frequency Regulation ±1%; ±3%
Transfer Time 0ms
Efficiency (Norl) Up to 92%
Efficiency (ECO) Up to 97%
ColdStart Exists
BATTERY
Quantity
20pcs
Voltage 240VDC
Recharge Time 4 hours to 90%
FRONT PANEL
Status On LED + LCD
Line Mode, Backup Mode, ECO Mode, Bypass Supply, Battery Low, Battery Bad/Disconnect, Overload,
interrupting during transfer & UPS Fault
Information on LCD
Input Voltage, Input Frequency, Output Voltage, Output Frequency, Load Percentage, Battery Voltage &
Inner Temperature.
Self-Diagnostics Upon Power-on, Front Panel Setting & Software Control, 24-hour routine checking
PHYSICAL
Input / Output Connection
hardwire
External Battery Connection hardwire
Dimensions (HxWxD)mm 710x254x585
Net Weight (Kgs) (with battery ) 30 38 45
Leakage Current < 3mA at Full Load
ENVIRONMENT
Operating Temperature Range
0ᵒC - 40ᵒC
20 - 25ᵒC (Recommended For Longer Battery Life)
Maximum Altitude without Deratimg
(m)
1000m
Relative Humudity Range 90% RH Maximum (non-condensing humidity)
Acoustic Noise <50dB (at 1m)
COMMUNICATION
Interface Type
Standard RS232 Interface
Communication Slot USB & EPO***, RS485 & EPO***, Relay Contacts & EPO, SNMP/WEB
STANDARDS
Safety
IEC/EN 60950,62040-1
EMC IEC/EN 62040-2
Performance IEC/EN 62040-3
Protection Class IP20
***These cards are not suitable to use simultaneously.