10.
Refit the new emitter in reverse order making sure that no wires can get trapped.
Replace both ends side reflectors and their screws. Before any other parts are fitted to make
sure emitter is held safely.
Fig. V
W A L L M O U N T E D C O N F I G U R A T I O N S - A T A G L A N C E
1 x Alpha H1 Unit
2 x Alpha H1 Units
3 x Alpha H1 Units
9.
The emitter can now be removed away from the heater leaving it ready to have the new
emitter fitted as shown in Fig. V.
15
