InfoPrint 6500 Series, Руководство пользователя

Страница: 41 / 360

Active versus Saved Configurations
41
SET TOP OF FORM
Pressing the SET TOP OF FORM key in the NOT READY state,
unless there is data in the buffer, moves the paper downward
relative from the TOF alignment index to the print station and sets
this position to be the top of form. Positions the TOF correctly,
independent of the form length. If there is data in the buffers, this
data is printed and then the printer slews to the place on the page
where the printing left off.
CANCEL Pressing the CANCEL key clears all of the data in the print buffer.
This key can be disabled in the menus. The CANCEL key is not
active during VIEW and EJECT operations. The CANCEL key
does the following:
1. Stops printer tests in progress.
2. Cancels a print job. This operation depends on the printer
interface.
Coax Interface (non-SCS mode)
The CANCEL key is not effective and the “009
INVALID KEY” error message displays.
NOTE: With a Coax Interface, press the CANCEL
key a second time to stop the previous
cancel.
Coax Interface (SCS mode)
Effective in the NOT READY state, but the action
occurs only in the READY state. When pressed, the
“059 CANCEL PRINT ACTIVE” message is
displayed.
Twinax Interface
Effective in the READY and NOT READY states.
When pressed, the “059 CANCEL PRINT ACTIVE”
message is displayed.
IPDS Interface
Ethernet (IPDS mode): Effective in the NOT
READY state. The two forms of cancel are:
a. Full Cancel: A CANCEL command is sent to
the host requesting that the print job be
cancelled and the next job in the queue be
submitted for printing. This is done by pressing
the CANCEL key twice. When pressed, the
“059 CANCEL PRINT ACTIVE” message is
displayed.
b. Clear Buffers: A Clear Buffers command is
sent to the host informing the host that the
printer has cleared its buffers. At this point, the
job can be restarted from any page based on
the instruction from the host. This is done by
pressing the CANCEL key once, then pressing
Using the Operator Panel