Infomir MAG-00, Руководство пользователя

Страница: 46 / 50

MAG-200. User Guide (Rev 1.2 05/02/2010,17:23)
« Данный видео выход не работает в HD режиме ...» («This video output does not operate in
HD mode...») appears on the TV screen
Trouble Measures
The «TV System» option in the bootstrap loader
settings contains one of HD modes, although the video
output, which is currently used (SCART, composite
CVBS or S-Video) does not support HD mode. Use video output which supports HD-modes, i.e.
component Y-Pr-Pb or HDMI, or set SD-mode in
the bootstrap loader menu (for example, «576i
PAL»)
Video is present on the screen, but sound is absent
Trouble Measure
Audio channel from the device is incorrectly
linked to the TV Check the connection of audio channel (see « MAG-
200 connection to TV set »)
The audio cable is defective or electric
contact is faulty Try to connect audio using another cable or another
connecting scheme (see «
MAG-200 connection to TV
set »). Check the connection firmness.
Volume level on the TV and/or STB is set
below the threshold of hearing Check the volume level on your TV and/or MAG-200
Basic software cannot be loaded
Messages «No link detected», «DHCP Retry#» и «DHCP Error» appear on the screen
Trouble Measures
The «Boot Mode» option in the bootstrap loader
menu is set to «DHCP», but Ethernet cable («patch-
cord») is not linked to the connector «LAN» of the
device If you intend your device to be loaded from
the local network, check the connection of the
Ethernet cable. The connector RJ-45 must be
inserted firmly (up to specific click).
If a patch-cord is not available set the option
«Boot Mode» in the bootstrap loader menu to
«NAND»
The Ethernet cable is not activated or faulty If the LEDs (green and yellow) are not lit in the
«LAN» connector, refer to the technical support
service of your network operator
Other troubles Refer to the technical support service of your
network operator
Refer to the technical support service of your operator if one of the following messages appears on
the TV screen:
–
«Error loading image from nand»
– «Active partition not valid»
– «Wrong image»
– «Wrong digital signature»
46