MAG-200. User Guide (Rev 1.2 05/02/2010,17:23)
Characters input using remote control
Digits, lowercase Latin letters and special characters are entered in the
virtual keyboard
mode
of the device. Only the numeric buttons «1»…«9» are used in this mode.
To enter a
digit
press the corresponding button only once. If the same digit should be
repeated wait for one second and press this button again. When you press different buttons
no pause between them is necessary.
To enter a
letter
use the numeric button under which this letter is inscribed. In this case it may
be required to press this button repeatedly to display the letter wanted. The interval between
pressings should not exceed one second. At the first press the digit corresponding to this
button will be displayed on the screen and after that – the letters in the succession specified.
The succession is cyclic, which means that after press the last letter in the succession the
digit will be displayed again, and so forth. So, if you accidentally miss the needed letter, just
proceed press the button until the wanted letter appears on the screen.
For example, if you want to enter the letter «c» use the button «2» and press it four times
with intervals not exceeding one second. At the first press character «2» appears on the
screen, at the second press «a» appears in the same position, at the third press – «b», at the
forth press - «c».
To enter
special characters
press the button «1» («SYMBOL») twice. The table of special
characters will be displayed on the screen allowing you to choose the needed character.
Notice
The table does not present a complete set of special characters. It contains only
those characters, which are most probably used when working with the device.
The active position highlighted with the blue color is moved with cursor buttons. The
character selected is entered with «OK» button (Enter). If the active position moves to the
extreme line or column, the next press of the cursor button will move it to the opposite
position. The last entered character can be deleted with the «Back» button on the remote
control (Backspace).
Some forms may contain the elements of choice usually called «checkbox» or «tick-box».
Depending on the realization of the device software this element presents a box, which is
ticked off or marked with a cross sign when it is switched ON.
To change over the state of the checkbox with remote control use the «MIC On/Off» button
unless otherwise stated. This button corresponds to the SPACE bar on a standard PC-
keyboard.
20
Содержание MAG-00
