36
Red LED behavior and projector errors
If the projector is not functioning properly and the red LED is blinking, con-
sult
Table 2
to determine a possible cause. There are two second pauses
between the blinking cycles. Visit
our website for more details on the red
LED error codes. See the inside back cover for contact information.
Projected image size
NOTE
: Visit our website for an interactive image size calculator.
Table 3:
Red LED Behavior
Explanation
One (1) blink
The lamp won't strike after five (5)
attempts. Check the lamp and lamp door
installations for loose connections.
Two (2) blinks
The lamp counter hours have exceeded
lamp life hours. Replace the lamp and
reset the lamp hours counter.
Three (3) blinks
The projector has shut down the lamp.
Turn the projector off and wait one
minute, then turn the projector on. If the
lamp does not turn on, replace the lamp.
Contact Technical Support for repair if
replacing the lamp does not solve the
problem.
Four (4) blinks
A fan has failed. Contact Technical Sup-
port for repair.
Five (5) blinks
The projector is overheating. Check for a
blocked air vent. Contact Technical Sup-
port for repair if clearing the air vents
does not solve the problem.
Table 4:
Image sizes
Distance
to screen
(feet/m)
Minimum
Diagonal
(feet/m)
throw
ratio 1.72
Maximum
Diagonal
(feet/m)
throw ratio 1.44
Minimum
Horizontal
(feet/m)
throw ratio 1.98
Maximum
Horizontal
(feet/m)
throw ratio 1.65
5/1.5
2.9/0.9
3.5/1.1
2.6/0.8
3.1/0.9
10/3
5.8/1.8
6.9/2.1
5.1/1.5
6.0/1.8
15/4.6
8.7/2.6
10.4/3.2
7.6/2.3
9.0/2.8
20/6.1
11.6/3.5
13.8/4.2
10.1/3.1
12.0/3.7
30/9.1
17.3/5.3
20.6/6.3
15.1/4.6
18.0/5.5
32.8/10
18.9/5.8
22.6/6.9
16.5/5.0
19.7/6.0
