9. Select the Projector Control tab.
8.14
DIRECTLY CONNECTING A COMPUTER TO THE PROJECTOR
1. Select Network > LAN > DHCP.
2. Select Off.
3. Press Enter.
4. Select Network > LAN.
5. Configure the IP address, Subnet Mask, Gateway, and DNS settings.
6. Set the computer to use the same IP address, subnet mask, gateway, and DNS settings.
7. Open a web browser.
8. Type the projector’s IP address type the user name and password.
The default user name and password is admin.
41
*
* Not Applicable to Core Series
Содержание Quantum Laser Core INL144
Страница 28: ...6 CONNECTING 6 1 CONNECTION DIAGRAM 28 No LAN on CORE Series ...
Страница 62: ...62 ...