InFocus Quantum Laser Core INL144 Скачать руководство пользователя страница 47

Страница: 47 / 68

12.4

SOLVING VIDEO, AUDIO, AND REMOTE CONTROL ISSUES

The following table provides solutions for potential video, audio, and remote control issues.

Issue

Cause

Solution

Video is frozen.

The Freeze button has been

pressed.

Press the Freeze button on the remote to unfreeze the video.

Video is stretched.

16:9 (wide) source is setup

incorrectly.

Ensure the source is set to use the 16:9 (wide) display format.

Letterbox (LBX) source is setup

incorrectly.

Use the On Screen Display (OSD) menu to set the aspect ratio to LBX.

4:3 source is setup incorrectly.

Use the On Screen Display (OSD) menu to set the aspect ratio to 4:3.

No audio.

Projector is muted.

Press the Mute button to unmute the projector.

Volume setting is too low.

Press the button to increase the volume.

Source cable is not connected.

Ensure the source cable is securely connected to the projector and

source device.

Source is muted.

Ensure the source has not been muted.

Remote does not work.

Batteries expired.

Install new batteries.

Batteries installed incorrectly.

Remove and reinstall the batteries.

Remote is too far from projector.

The remote should be within 16.4 feet (5m) of the projector.

IR receiver cannot detect remote.

Ensure there are no obstructions between the remote and the projector's

IR receiver.

Ensure the operating angle of the remote control is within ±20° to the

projector's IR receiver.

Ensure there are no fluorescent light sources shining on the projector's IR

receiver.

If you are still experiencing technical issues with your projector, please contact InFocus Customer Support at

www.infocus.com/support.

12.5

REPAIR BY SKILLED PERSONS

Servicing is required when the projector has been damaged, exposed to rain or moisture, does not operate normally, or has been

dropped. All servicing and repairs should be performed by an authorized InFocus representative.

Содержание Quantum Laser Core INL144





































































Результаты поиска

Содержание Quantum Laser Core INL144

Отзывы:

Похожие инструкции для Quantum Laser Core INL144

Бренды по названию

Популярные бренды

InFocus Quantum Laser Core INL144, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Quantum Laser Core INL144

Отзывы:

Похожие инструкции для Quantum Laser Core INL144

Бренды по названию

Популярные бренды