InFocus Quantum Laser Core INL144 Скачать руководство пользователя страница 46

Страница: 46 / 68

12.3

SOLVING IMAGE ISSUES

The following table provides solutions for potential image issues.

Issue

Cause

Solution

No image.

Incorrect source is selected.

Press the SOURCE button or one of the source buttons again.

Source cable is not connected.

Ensure the source cable is securely connected to the projector and source

device.

Source is not playing

Make sure the source has not stopped or paused the video.

If the source is a computer, make sure the PC is not in a screen saving or

power saving mode and resend the video to the projector.

AV-Mute is on.

Ensure the AV-MUTE (video off) buttons has not been pressed.

Brightness and/or contrast

setting is too low.

Use the On Screen Display (OSD) menu to adjust the brightness and

contrast.

Image is reversed.

Orientation is set incorrectly.

Use the On Screen Display (OSD) menu to adjust the orientation.

Image has slanted sides .

Projector is not positioned

perpendicularly to the screen.

Ensure the projector is centered on the screen and below the bottom of the

screen.

Keystone is not set correctly.

Press the ke or - buttons to adjust the image alignment.

Image is too small or too large.

Projector is too far from or too

close to the screen.

Move the projector.

The zoom is not set correctly.

Press the Zoom + or - buttons to adjust the zoom.

Image is too dark.

ECO mode is enabled.

Check if the projector is in the Forced ECO mode because the ambient

temperature is too high.

Image is blurry.

Focus is not set correctly.

Use the On Screen Display (OSD) menu to adjust the focus.

INL2156 or INL2166: Use the focus ring to adjust the focus.

Projector is too close or too far

from the screen.

Ensure that the distance between the projector and screen is within the

adjustment range of the lens.

Smudge or condensation on

the lens.

Clean the lens.

Condensation may form on the lens if the projector is cold, brought into a

warm place, and turned on.

Image is scrolling or flickering.

Source resolution and/or

frequency is not supported.

Make sure that the source's resolution and frequency are supported by the

projector.

Содержание Quantum Laser Core INL144





































































Результаты поиска

Содержание Quantum Laser Core INL144

Отзывы:

Похожие инструкции для Quantum Laser Core INL144

Бренды по названию

Популярные бренды

InFocus Quantum Laser Core INL144, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Quantum Laser Core INL144

Отзывы:

Похожие инструкции для Quantum Laser Core INL144

Бренды по названию

Популярные бренды