InFocus INF8630AG, Руководство по оборудованию

Страница: 10 / 56

Page 8
SETUP
Mounting
This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this
product's specifications and follow the manufacturer installation instructions.
WARNING: This display must be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the
machine may cause injury or death.
Mounting Location
• Install the display near an easily accessible AC power outlet.
• Mount display to solid wall or stable horizontal surface.
• Do not install the display in places subject to mechanical vibration.
• Do not place the display on an unstable surface, which could result in serious personal injuries and display damage. When you
mount the display to a stand, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by
the manufacturer.
• Do not install or use the display near any heat sources such as radiators, heat registers, stoves, or other devices (including
amplifiers) that produce heat.
• Do not place the display in direct sunlight, humid, greasy or dusty places or in places where the display may come into contact with
rain, smoke or steam.
• Protect display from environmental hazards; that is: heavy dust, insects, condensation, other moisture, and strong electromagnetic
fields.
Mounting Technique
• Use a professional technician to properly install display.
• Use only properly rated wall and stand mounting hardware that meet this product’s specifications and follow the manufacturer
installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from
improper installation.
• Place your display front face-down on a clean, cushioned surface, to prevent damage to the screen surface.
• Use metric 8 (12 mm) screws, when you mount the display to a wall. Use spring washers to prevent the screws from coming loose.
In addition, the mounting interface should comply with the UL1678 standard in North America. The mounting means should be
strong enough to bear the weight of the display.
• Maintain a distance of at least 1.98” (5 cm) between the display and the wall, if the display is installed against the wall; this
distance provides adequate ventilation.