37
3. Management with Web browser software
• In Standby mode, the power indicator will flash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [
|
]. The
schedule function does not work when the power switch is turned off, [
O
] or
the breaker in a room is tripped. The power indicator will light orange or green
when the projector is receiving the power.
NOTE
Schedule Settings (
21
)
Schedule settings can be configured from a web browser.
Example
: If the IP address of the projector is set to
192.168.1.10:
1) Enter
“http://192.168.1.10/”
into the address bar of the web browser.
2) Enter the Administrator ID and password and click [
Logon]
.
3) Click the [
Schedule Settings]
on the main menu and select the required
schedule item. For example, if you want to perform the command every Sunday,
please select
[Sunday]
.
4) Click the [
Enable]
check box to enable scheduling.
5) Enter the date (month/day) for specific date scheduling.
6) Click the [
Apply]
button to save the settings.
7) After configuring the time, command and parameters, click [
Register]
to add
the new event.
8) Click the [
Delete]
button when you want to delete a schedule.
There are three types of scheduling.
1) Daily: Perform the specified operation at a specified time every day.
2) Sunday ~ Saturday: Perform the specified operation at the specified time on a
specified day of the week.
3) Specific date: Perform the specified operation on the specified date and time.
3.4 Event Scheduling (continued)
