20
3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
The Alert Items are shown below.
Setting Item
Description
Alarm Time
Configures the time to alert.
(Only
Lamp Time Alarm
and
Filter Time Alarm
.)
SNMP Trap
Click the [
Enable]
check box to enable SNMP Trap alerts.
Send Mail
Click the [
Enable]
check box to enable e-mail alerts.
(Except
Cold Start
and
Authentication Failure
.)
Mail Subject
Configures the subject line of the e-mail to be sent.
The length of the subject line can be up to 100 alphanumeric
characters.
(Except
Cold Start
and
Authentication Failure
.)
Mail Text
Configures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
(Except
Cold Start
and
Authentication Failure
.)
Click the
[Apply]
button to save the settings.
• The
Filter Error
e-mail is triggered based on the FILTER MESSAGE
settings in the OPTION>SERVICE submenu which defines the when the filter
message will display on the projector screen. The e-mail will be sent when the
filter timer exceeds 2000, 5000 or 10000 hours based on this configuration.
Notification e-mails will not be sent if the FILTER MESSAGE is set to OFF.
(
OPTION menu in the User’s Manual (detailed) – Operating Guide
)
•
Lamp Time Alarm
is defined as a threshold for e-mail notification (reminder)
of the lamp timer. When the lamp hour exceeds the configured threshold, the
e-mail will be sent out.
•
Filter Time Alarm
is defined as a threshold for e-mail notification (reminder)
of the filter timer. When the filter hour exceeds this threshold, the e-mail will be
sent out.
NOTE
