manualshive.com logo in svg

InFocus IN5122, Руководство пользователя, Страница: 32 / 39

Поделиться
Скачать
InFocus IN5122 Скачать руководство пользователя страница 32

30

Setting input ports using menu

5.3 Starting up the Main projector 

After completing section 

5.2 Checking Main projector's operating status

, both 

projectors should be set to ALTERNATE mode and the Sub projector should be 

operating.  Since the Smart Stack settings can only be changed when the Main 

projector is operating, this section explains how to switch from the Sub projector 

to the Main projector.  

1.

  Use the ▲/▼/◄/► buttons to go into the following menu.

  

ADVANCED MENU

 > OPTION  

 > 

SERVICE

 > 

COMMUNICATION

 > 

STACK

The STACK menu will appear on screen.

 

(

User's Manual

 

→

 

OPTION menu

)

2.

  Check the ALTERNATE MODE setting in the menu.

If NORMAL is displayed, both projectors will turn on alternately.  Therefore, the 

Main projector will turn on when you restart the projectors.  

(1) Press the 

STANDBY/ON

 button on the remote control or Main projector's 

control panel to turn off the Sub projector. 

(2) After the projector has cooled down, press the 

STANDBY/ON

 button to turn on 

the projectors again.  The Main projector will turn on.  

If AUTO is displayed, the projector with the least lamp usage is turned on.  

Therefore, the Main projector may not be turned on even if you restart the 

projectors.  Follow the procedures below to turn on the Main projector.  

(1) Use the ▲/▼ button to highlight STACK MODE, and press the ► button to 

display the STACK MODE dialog.

(2) Use the ▲/▼ button to highlight OFF, and then press the ► button to save the 

change. 

(

23

)

(3) Repeat the above procedures to display the STACK MODE dialog again.

(4) Use the ▲/▼ button to highlight SUB, and then press the ► button to save the 

change. 

(

23

)

(5) After exiting the menu, wait for 10 seconds or more.

(6) Press the 

STANDBY/ON

 button on the remote control or Main projector's 

control panel, the Sub projector will turn off.

(7) After the projector has cooled down, press the 

STANDBY/ON

 button to turn on 

the projectors again.  The Main projector will turn on even if LAMP MODE has 

been set to AUTO.  

3.

  You can change the settings for Smart Stack now that the Main projector is 

operating.  Go to 

5.4 Setting the menu

. 

(

31

)  

NOTE

  • If the Main projector cannot be turned on due to an error or other 

issues, the Sub projector will turn on even if you follow the procedures above.  

Take the necessary actions to fix the Main projector, and then change the 

settings for Smart Stack.  

Содержание IN5122








































Отзывы:

Нет отзывов