IN3138HD User’s Manual
–
8
–
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
:
1.
Up
Navigates up and changes settings in the OSD
2.
Enter
Changes settings in the OSD
16
3.
Power
Turns the projector on or off
10
4.
Right
Navigates to the right and changes settings in the OSD
5.
Increases volume
6.
Volume -
Decreases volume
15
7.
Mute
Mutes the built-in speaker
8.
Freeze
Freeze/unfreezes the on-screen picture
9.
Source
Selects the input device
10.
Auto
Auto adjustment for frequency, tracking, size, position (RGB only)
11.
Keystone top
Corrects keystoning of the image (when it is wider on
top)
12.
Keystone bottom
Corrects keystoning of the image (when it is wider on
the bottom)
15
13.
Down
Navigates down and changes settings in the OSD
14.
Left
Navigates to the left and changes settings in the OSD
15.
Menu
Opens and exits the OSD
16
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control. All operations can be carried out with the
remote control.