Infoblox ND-2200, Руководство по установке

Страница: 32 / 44

Infoblox NIOS CLI
For the Infoblox 2200 Series Platforms 32
Infoblox NIOS CLI
The NIOS CLI allows you to configure and monitor the appliance using a small set of Infoblox commands. Some
tasks, such as resetting the appliance, can be done only through the CLI. You can access the NIOS CLI through a
direct console connection from your management system to the Infoblox appliance. (For more information, see
Console Port
on page 27.) You can also enable remote console SSHv2 (Secure Shell version 2) access through the
Infoblox Grid Manager or CLI, and then access the CLI from a remote location using an SSHv2 client. (For more
information, refer to the
Infoblox NIOS Administrator Guide .)
Using CLI Help
You can display a list of available CLI commands by typing
help
at the command prompt. For example:
Infoblox > help
? Display help
delete Delete files
dig Perform a DNS lookup and print the results
exit Exit command interpreter
help Display help
ping Send ICMP ECHO
quit Exit command interpreter
reboot Reboot device
reset Reset system settings
set Set current system settings
show Show current system settings
shutdown Shutdown device
traceroute Route path diagnostic
ddns_add Send DDNS update to add a record
ddns_delete Send DDNS update to delete a record
rotate Rotate files
To view an in-depth explanation of a CLI command and its syntax, type
help command
after the command
prompt. For example:
Infoblox > help rotate
Synopsis:
rotate log [ syslog | debug | audit | ifmapserver ]
rotate file groupname filename [ filename2, filename3, ...]
Description:
Rotates the specified log file, up to 10 previous.
logfiles will be preserved
The two main groups of NIOS CLI commands are set and show . To see the complete list of the set commands, enter
help set
after the command prompt. Likewise, to see a complete list of the show commands, enter
help show
.
For information about the CLI commands, refer to the Infoblox CLI Guide.