Copyright ©2018, Infoblox, Inc.All right reserved.
RoHS 6 Compliant 1000 BASE-T Copper SFP Transceiver
Infoblox part number: IB-SFP-CO
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (0°C to +85°C)
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
RoHS 6 compliant and Lead Free
Access to physical layer IC via 2-wire serial bus
1000 BASE-T operation in host systems with SGMII interface
RoHS 6 Compliant 2Gb/s 850nm SFP Transceiver
Infoblox part number: IB-SFP-SX
Up to 2.125 Gb/s bi-directional data links
Hot-pluggable DFP footprint
Commercial operating temperature range: 0°C to 70°C
850nm Oxide VCSEL laser transmitter
Duplex LC connect
RoHS 6 Compliant and Lead-Free
Up to 500m on 50/125m MMF,300m on 62.5/125m MMF
Metal enclosure, for lower EMI
Single 3.3V power supply
Low power dissipation
Infoblox SFP+ Long Range 10GbE LR fiber Transceiver
Infoblox part number: IB-SFPPLUS-LR
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range -5°C to 70°C
Single 3.3V power supply
Maximum link length of 10km
Uncooled 1310nm DFB laser
Receiver limiting electrical interface
Duplex LC connector
Infoblox SFP+ Short Range 10GbE SR fiber Transceiver
Infoblox part number: IB-SFPPLUS-SR
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 300m on 2000 MHz-km MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Infoblox 4000 Series Appliance Rear Panel
The Infoblox 4000 Series appliances offer a choice of dual AC power supplies, or dual DC power supplies with or without NEBS-3 compliance. In
all cases, power supplies are hot swappable; any single power supply can be replaced without disrupting the operations of the appliance.
The Infoblox 4000 Series provides four (4) RJ-45 Gigabit Ethernet interfaces that operate as the MGMT port, LAN1 port, High Availability (HA)
port and LAN2 port in the Infoblox system. The four port assignments are from left to right and reflect standard Infoblox port assignments as
shown in
and listed in
.
illustrates the optional system configuration with optical interfaces.
Figure 4
Table 4 Figure 7
Figure 6 Infoblox 4000 Series Rear View with RJ-45 Gigabit Ethernet Ports