21/22
3.
IR OUT Setting
•
3 sets of independent IR OUT control function (2 sets for the transmitter end, 1
set for the receiver end).
•
Each set of IR OUT has two independent command corresponding to switch
actions.
•
You can name the controlled device in the
“Device Name” for each set of IR
OUT. (e.g. airconditioner)
•
Support two remote control code selection methods, the first method is to directly
load the ready-made CCF infrared code file; the second is infrared learning.
Infrared learning process:
Step 1:
Make sure the system connection works normally, connect the IR receiver
cable to the IR IN port of the Receiver.
Step 2:
Click the
“Learn” button on Web GUI to enter the learning mode, the
“STATUS” indicator on the Receiver will flash. Align the learned IR remote with
the IR receiver, and press the button to learn.
Step 3:
If the learning is successful, the
“STATUS” indicator will be on, the input
window on Web GUI will display the learned CCF code, and there will be a prompt
of
“Learning successful”; if the learning fails, the “STATUS” indicator will be off, and
there will be a prompt of
“Learning failure” on Web GUI.