12/22
7.
System Connection and Application
There are two connection modes according to different applications.
Mode 1
: Single ShareBox ShareBox Rx application for small
conference room with 2-5 people, as shown in the following figure.
PC
PC
BYO D
Receiver
Audio cable
Speak ers
AUDIO VGA
cable cable
HDMI cable
CAT5e/6A
HDMI cable
RS-232
RELAY
ShareBox
Master
Projector
Projection Screen
Please follow the steps below to complete the connection:
Step 1:
Connect the signal source to the HDMI 1 and HDMI 2 ports of the
desktop plate via standard HDMI cables.
Step 2:
Connect the signal source to the VGA port of the desktop plate via
a standard VGA cable; Connect the audio source to the AUDIO port via a
3.5mm jack cable.
Note:
3.5mm stereo audio and VGA are simultaneously switched and output.
Step 3:
Connect the display to the DVI OUT port of the desktop plate via a
standard DVI adapter cable.
Step 4:
Connect the Receiver to the HDBaseT OUT port of the desktop plate
via a CAT cable.
Step 5:
Connect other control and display devices.