All rights reserved and shall not be copied and distributed in any form without written permission.
11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
21
8. Preventative Maintenance
8.1 Battery Installation
➢
When the icon
is appeared on the status bar, please replace with new batteries;
➢
It is necessary to power off before replacing the batteries.
➢
Turn the
battery compartment knob (10)
in a counterclockwise to open and
remove it.
➢
Install two CR123 batteries correctly according to electrode instructions on the label
inside the battery compartment as shown in fig. 8-1.
➢
Replace the battery cover and press heavily until heard clicking sound and make
sure the cover is closed on both sides correctly.
➢
After installation, please set the battery type in the advanced menu for the first
starting up--choosing 3.7V or 3V (referring to the instructions of the section 6.5),
otherwise the battery level indication will be inaccurate and may be interrupted
during operation.
Note:
⚫
Disposable batteries are be suggested only. That is risky when using the
rechargeable batteries, due to inconsistent quality.
⚫
Please do not use batteries of different types or batteries with various charge levels.
Fig. 8-1 Schematic diagram of battery installation
⚫
The Clip C series also supports the extended use of 16650 batteries with the
InfiRay’s extra battery accessory, to increase the working time of the product up to