QQ2 LT
CleanMate
QQ2 LT
QQ2 LT
QQ2 LT
QQ2 LT
QQ2 LT Series
QQ2 LT Series
battery
r
• Press the Start or Power button on the control panel of the unit or
press the Stop button on the remote control.
Stopping Operation
The operation and maintenance of the CleanMate is very simple. To maintain
top performance of the unit, it is recommended that you follow a routine
cleaning and maintenance schedule after each use.
1. Make sure to clean empty the Dust Bin and to brush off the Air Filter after
every cleaning cycle.
2. Make sure that the vacuum intake is free of any debris and obstacles.
3. Make sure that the bristles of the Side Brush are free and not tangled with
hair, etc.
4. Make sure that there is not a lot of hair, string, etc caught up in the Roller
Brush.
5. Remove and clean out the Roller Brush.
6. Make sure that there is nothing blocking the air ventilation exits on the top of
the unit.
Cleaning Dust Bin and Air Filter
1. Make sure the power of the unit is 'Off'.
2. Press the Dust Bin Open Button. (See Illustration 1)
3. Remove the Dust Bin Cover. (See Illustration 2)
4. Remove the Dust Bin from its compartment by placing your finger(s) in the
groove near the front of the CleanMate, and on the tab at the center of the air
filter. Squeeze to disengage the tab, and then lift the Dust Bin straight out of
its compartment. (Illustration 3)
5. Remove the Air Filter from the Dust Bin by firmly holding the Dust Bin in one
hand, and pulling the Air Filter out by the tabs on the Air Filter. (Illustration
4)
6. Empty the contents of the Dust Bin into a trash can. (Illustration 5)
• Rinse the Dust Bin with water if needed. (Illustration 6)
• Let the Dust Bin completely dry before using it again.
7. Using the provided Hand Brush to brush debris off the Air Filter. (Illustration
7)
• The Air Filter can be rinsed out with water
• Make sure the Air Filter is completely dry before using it again.
8. DO NOT clean the Dust Bin or the Air Filter in a Clothes Washing Machine or
a Dish Washing Machine.
