8
Camera Address:
set the address of V1771N series Megapixel
network PTZ Domes.
Baud rate:
set the communication baud rate, the default value is
2400 bps.
Protocol:
select the corresponding protocol of camera. The built-in
service software in this IP dome supports Pelco-P, Pelco-D and
Infinova.
3.8 System Log
Click
button on the navigation bar to enter the
system log interface shown as below:
Figure 3-20
It can display 30 logs on a page. User can turn over the page by
clicking the below arrows or skip to the designated page by clicking
“Goto”. Click “Delete logs”, a prompt will come out. Then, click
“Yes” to clear logs.
3.9 Optimize settings
Click
button, and then comes out the Optimize
Settings interface:
Figure 3-21
If you select “QuickTime” as the player, you’d better set Optimize
Video to “Optimize For QuickTime”. If you select “Infinova
player” as the player, you’d better set Optimize Video to “Optimize
For infinova”.
Note: Only the super user can set this option.
3.10 SD Card
Click
button to enter the interface shown below:
Figure 3-22
User can view the total size and the free space of the SD card, and
format the card.
If you want to pull out the SD card when the SD card is working,
please click the button “Safe pull out SD card” and the prompt will
display as below:
Figure 3-23
3.11 Recording Settings
Click
button to manage recording control and
recording replay.
3.11.1 Recording Control
Figure 3-24 Recording Control
Recording storage mode:
circle mode or stop mode selectable.
Circle mode means if SD card has no free space, the latest
recording will automatically replace the earlier recording. For Stop
mode, if SD card has no free space, the camera will automatically
stop recording.
Manual Recording Control
: start or stop manual recording.
Automatic recording when network anomaly
: Enable or disable
automatic recording when network anomaly function.