6
◆
US-1 Theater Pac – Owner’s Manual
H
ORIZONTAL
M
OUNTING
...
Figure 5. This illustration shows how to
mount a US-1 speaker horizontally on a
wall or ceiling four different ways.
For horizontal mounting, fasten the #6 wood screws (not included) to a wall stud, leaving a 3⁄16"
clearance between the base of the screw head and the wall. If desired, loosen the bracket screw,
adjust the bracket angle, and tighten the bracket screw.
NOTE: You may want to route the wires before tightening the bracket screw (see Figure 7 on page 7).
Then orient the speaker horizontally, align the crossholes on the rear of the US-1 with the screws,
and slide the speaker down. Rotate the logo to match the orientation of the speaker.
Slide Speaker Down
Onto Wood Screws
#6 Wood Screws
(fasten to wall stud)
US-1 HORIZONTAL MOUNTING USING BRACKET
❶
Loosen Screw
❷
Rotate Bracket
❸
Tighten Screw
Screw
(inside hole)
US-1
(rear view)
US-1 Positions
(side view)
45
°
Tilt Up
(Bracket Open,
Position #1)
20
°
Tilt Up
(Bracket Closed)
67.5
°
Tilt Up
(Bracket Open,
Position #2)
90
°
Tilt Up
(Bracket Open,
Position #3)
3/16"
wall
wood
screw
(side view)
INF1446 3/22/99 9:58 AM Page 6
