9
10
①
Remove the chair body from the box. This should include the chair body, back
seat
pad
,
pillow
,
power
cord
,
remote control and control pocket. This
requires
at
least
three
people
.
While two
people
hold
the
seat
frame
on
the
two
sides,
the
third
person should
hold
the
backrest, working together to lift the chair out slowly.
See below:
①
③
③
②
Remote Control Pocket
Remote Control
④
⑤
④
Two people grasp left
and right metal seat
frame, while the other
holds the backrest,
slowly removing the
main body of massage
chair from the box .
①
To install the leg rest onto the main body:
①
Unscrew the bolt on the hanger of the leg rest.
②
Connect the leg rest air hose to the corresponding air nozzles of the main body tightly.
③
Plug the two power cables into the socket securely. Be careful to match the color and
direction: black to black, white to white.
④
Raise the rotation shaft board on the hangers,
lift the leg rest with your hands, place the rotation shaft into hangers on main body, then close
the rotation shaft board.
⑤
Screw it back tight.
⑥
Connect the leather leg rest cover to the
seat with the Velcro piece.
③
Black
White
②
③
②
④
Electric Power Cable
Head Cushion
Installation
Installation
(
1
)
Installation
(
2
)
Installation
Installation
Installation
Back Seat Cushion
Step 1. How to Move the Chair
Right Armrest
Left Armrest
Leg Rest Device
②
Remove the left and right armrests from
the armrest box. Hold each side of an
armrest and take it out slowly, one piece at
a time.
Please note:
The armrest is placed
upside down in the box. Place the armrest
box on a table or on level ground (be
careful to avoid scratching either armrest).
Step 2. How to Assemble the Leg Rest
Axis
cover
Hanger
Bolt
Socket
Air nozzle
Axis
Power line plug
Air tube
Lift the legrest to
insert the axis into
the hanger.
Put down the axis
cover and screw
on the bolt.
Air hoses connect to the air nozzle
and power cord connects to the
socket.
Air tube
Massage Chair
Main Body
OK
3D
-
3D
+
Air
Intensity
Hot
Rocks
On
/
Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D
：
20
min
③
Remove the leg rest device from the leg
rest box. Hold the leg rest by both sides to
take it out. Place it on level ground.
Again, remove carefully to avoid scratches.
Step 2: How to Use the Remote Control
Take out the remote control and plug it into the socket on the right side of massage chair seat.
When plugging in the remote, be sure to use the alignment guide on the plug and screw the nut
tightly. After attaching the armrest and remote control pocket, place the remote in the pocket.
Plug in the remote
control and screw
the nut tightly.
Remote Control
Remote
Control Plug
Remote Control
Cord Socket
Pay attention
to the alignment
guide.
OK
3D
-
3D
+
Air
Intensity
Hot
Rocks
On
/
Off
Auto
Menu
Zero
Set function by pressing Menu key.
Speed
Width
Intensity
3D
：
20
min
