58 | ISE-30(36)ZWDN650 FD
ISE-30(36)ZWDN650 FD | 59
ENG
ITEMS NEEDED:
Dome Camera
•
Outdoor Mount Kit (supplied)
•
Data Cable (supplied)
•
Ethernet Cable (network Dome Camera)
•
Standard/Compact Pendent Mount and equipped items (optional accessory)
•
Pole Thin/Wide Box Mounting (optional accessory)
•
Waterproof Rubber (supplied)
•
M5 Standard/Security Screw (supplied)
•
Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optional accessory)
•
TOOLS NEEDED:
Stainless Strap Cutter
•
Tool for screwing
•
Follow the steps below to mount the Dome Camera with the Pole Thin/Wide Direct Mounting and Standard/Compact
Pendent Mount.
Fasten the Pole Thin/Wide Direct Mounting on a pole with equipped stainless straps.
•
Run the cable(s) through the hole on the Pole Thin/Wide Direct Mounting with the Data Cable’s 22-pin cable
•
coming out.
Fasten the Standard/Compact Pendent Mount onto the Pole Thin/Wide Direct Mounting with the supplied screws
•
and washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming
out of the Pendent Mount’s outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
•
Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor Mount Kit to the Standard/Compact
•
Pendent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
•
7.6.2
POLE THIN/WIDE BOX MOUNTING
Pole Box Mounting: Pole Thin/Wide Box + Standard/Compact Pendent
Mount + Outdoor Mount Kit
DOME CAMERA INSTALLATION
8. SYSTEM EXPANSION
8.1
CONNECTING WITH CONNECTOR BOX
To integrate other surveillance devices with the Speed Dome Cameras, we provide three kinds of converter/repeater
to transform the communication formats between devices. If a converter/repeater is used, the total network distance
of the surveillance system can be extended, and the connected devices will also be protected. Up to 10 devices are
allowed to connect to each repeater. For more detailed information, please refer to the converter/repeater user’s
manual.
8.2
DATA FORMATS TRANSFORMING
SYSTEM EXPANSION
A power box contains a 24V AC adapter, two terminal blocks (for communication and power) and one alarm board.
With an IP66 case, the Power Box is ideal for outdoor installation environment. Two models are available: 100~115V
AC power input (P1030) and 220~230V AC (P2030). Additionally, users can either connect one Dome Camera to
one power box and to Internet or to other control devices (DVR, Control Keyboard and monitors), as shown in the
diagrams below. For more detailed information, please refer to the power box user’s manual.
Connecting the Dome to the Power Box and Internet
Connecting the Dome to the Power Box and Various Control Devices
Содержание ISE-30ZWDN650 FD
Страница 35: ...www infinity cctv com ...
