Infinity ISE-30ZWDN650 FD, Руководство пользователя

Страница: 23 / 35

42 | ISE-30(36)ZWDN650 FD ISE-30(36)ZWDN650 FD | 43
ENG
Switch No. Protocol Baud Rate
0 VCL 9600
1 Pelco D 2400
2 Pelco P 4800
4 Chiper 9600
5 Philips 9600
7 DSCP 9600
8 AD422 4800
9 DM P 9600
11 Pelco D 4800
12 Pelco D 9600
13 Pelco P 2400
14 Pelco P 9600
15 JVC 9600
21 Kalatel-485 9600
22 Kalatel-422 4800
Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance, the protocol switch should be set as
follows:
CAMERA SETUPS AND CABLE CONNECTIONS CAMERA SETUPS AND CABLE CONNECTIONS
The Dome Camera is supplied with one integrated 22-pin Data Cable for connecting with the power, video, and RS-
485/audio input & audio output cables. Please read the following sections thoroughly before making connections.
6.3
CABLES AND CONNECTIONS
For operation, the Integrated High Speed Dome Cameras require video, RS-485 and power cables as described
below:
The video cable sends video signals to a remote viewing site. Using a coaxial cable to send video signals is •
recommended.
RS-485 cable carries commands from a control device to the Dome Cameras. A CAT 5, 24 gauge cable is rec-
•
ommended.
Power supply: DC 12V/AC 24V output voltage
•
Note Ensure power supply meets the Dome Camera’s power requirement, or product impairment will occur.
If any mistake happens, please contact with a qualified maintenance engineer.
The analog Speed Dome Camera’s Data Cables are illustrated respectively as shown below.
6.3.1
CABLE REQUIREMENTS
6.3.2
22-PIN DATA CABLE
Note: Be careful not to pull the cables improperly during installation. Additionally, it is suggested to fasten
the cables after cable connection is completed. Furthermore, when wiring the AC 24V power cable, make
sure the Ground wire is inserted into the mid-pin of the terminal block.
With the 22-pin connector, installers can simply connect the power, video and RS-485 cables to the Dome Camera
at once. Particularly, the alarm pins are serviceable for connecting alarm input and output devices, such as alarm
sensors, sirens or flashing lights with the surveillance system. The analog and network Speed Dome Cameras’ 22-
pin connector definition will also be specified as follows.
6.3.3
22-PIN CONNECTOR DEFINITION
Decimal Digit Single Digit