Infinity ISE-12ZWDN650 FD, Руководство по эксплуатации

Страница: 29 / 37

54 | ISE-12ZWDN650 FD ISE-12ZWDN650 FD | 55
ENG
Indoor Mount Kit (optional accessory) •
Waterproof Rubber (Indoor Mount Kit’s accessory ) •
Screws and Screw Anchors for fixing the Compact Pendent Mount (not supplied) •
TOOLS NEEDED:
Tool for drilling •
Tool for screwing •
Follow the steps below to mount the Dome Camera with the Compact Pendent Mount.
Make a cable entry hole on the wall to recess the cables. Otherwise, users could push up the Cable Entry Board •
on the Compact Pendent Mount’s Mounting Plate to place the cables, as shown in the photo below.
Thread the cable(s) through the Indoor Mount Kit and join the Indoor •
Mount Kit to the Compact Pendent Mount with the supplied screws and washers. Then adjust the Waterproof •
Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers. •
Fix the Compact Pendent Mount on the wall with proper screws and screw anchors. •
Attach the Waterproof Rubber to the Compact Pendent Mount. •
Run the cable(s) through the Compact Pendent Mount with the Data Cable’s 22-pin cable coming out of the •
outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendant
Mount. The sponge can be placed in two ways as shown in the illustrations below.
Wall Mounting: Compact Pendent Mount + Indoor Mount Kit
ITEMS NEEDED:
Dome Camera •
Data Cable (supplied) •
Ethernet Cable (network Dome Camera) •
Standard Pendent Mount and equipped items (optional accessory) •
Indoor Mount Kit (optional accessory) •
Waterproof Rubber (Indoor Mount Kit’s accessory) •
Screws and Screw Anchors for fixing the Standard Pendent Mount onto the ceiling (not supplied) •
TOOLS NEEDED:
Tool for drilling •
Tool for screwing •
Follow the steps below to mount the Dome Camera with the Standard Pendent Mount.
Make a cable entry hole on the wall to recess the cables. Otherwise, users could push up the cable entry board on
the Standard Pendent Mount’s mounting plate to place the cables (see the illustration Compact Pendent Mount).
Fix the Standard Pendent Mount on the wall with proper screws and screw anchors.
Attach the Waterproof Rubber to the Standard Pendent Mount.
Run the cable(s) through the Standard Pendent Mount with the Data Cable’s 22-pin cable coming out of the outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Standard Pendent Mount •
with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
7.4.2
STANDARD PENDENT MOUNT
Mounting Plate
Cable Entry Board
Sponge
Sponge
DOME CAMERA INSTALLATION DOME CAMERA INSTALLATION