Infinity ISE-12ZWDN650 FD, Руководство по эксплуатации

Страница: 27 / 37

50 | ISE-12ZWDN650 FD ISE-12ZWDN650 FD | 51
ENG
The Dome Camera can be mounted to the concrete ceiling with the supplied Hard Ceiling Mount and optional
accessory: Straight Tube.
The indoor Dome Camera can be mounted to the concrete ceiling with the supplied Hard Ceiling Mount. The items
and tools needed for hard ceiling installation are listed as follows; all the supplied items are available in the Dome
Camera’s standard package.
ITEMS NEEDED:
Dome Camera •
Data Cable (supplied) •
Ethernet Cable (network Dome Camera) •
Hard Ceiling Mount with Decoration Ring (supplied) •
Fixing Plate (supplied) •
Self-tapping Screws; Plastic Screw Anchors (not supplied) •
TOOLS NEEDED:
Tool for drilling •
(+,–) Screw Drive •
Follow the instructions below to install the Mini Speed Dome Camera with the Hard Ceiling Mount.
7.3
CEILING MOUNT
7.3.1
HARD CEILING MOUNT
STEP 1
Fasten the Fixing Plate on the Dome
Camera’s back plate by first inserting
the side with three holes into its mate
slot on the camera’s back plate. Push
the plate inside the slot to the left,
aligning the three holes on the Fixing
Plate to the ones on the back plate,
and then screw the Fixing Plate tightly
using the supplied M3 screw.
Note: The orientation of the Fixing
Plate is shown in the figure on the
right side.
STEP 2
Remove the Decoration Ring from the
Hard Ceiling Mount.
STEP 3
Place the Hard Ceiling Mount to the
desired position on the ceiling, and
mark the position of the three screw
holes.
STEP 4
Drill these holes on the hard ceiling.
STEP 7
Connect the Data Cable and/or Ether-
net cable through the central hole of
the Mount to the Dome Camera’s cor-
responding connector.
Note: If use the network Speed
Dome Camera, an Ethernet cable is
needed other than the Data Cable.
STEP 5
Fix the Mount with three screws.
STEP 6
Remove the Optical Cover of the
Dome Camera.
STEP 8
Attach the Dome Camera to the Mount
and rotate it clockwise. Make sure
that the central part of camera bottom
is locked into the central hole of the
Mount. Ensure that the Fixing Plate
aligns with its mating screw hole on
the Mount as shown in the figure.
DOME CAMERA INSTALLATION DOME CAMERA INSTALLATION