Infinity BMX BICYCLES, Руководство пользователя

Страница: 23 / 51

Assembly Assembly
Accessories
3
42
Final Check
3
43
3 3
Accessories
If your bike is supplied with a water bottle and cage, attach the cage to the
bicycle using the Allen bolts provided.
Most bikes come equipped with a saddlebag or frame bag. The
saddlebag installs under the seat with the zipper facing the rear wheel.
Undo the straps that wrap around the bag, thread them through the rails
underneath the seat and secure around the bag. The smaller strap wraps
around the seat post. Frame bags install at the apex of the top and seat
tubes. Secure the straps around each tube.
NOTE: The frame bag straps must not bind the cables. The straps must
go around the frame only.
Other: Some 20” and 24” model bicycles come with a rear derailleur guard
to protect the rear derailleur from damage. To install, remove the rear
wheel axle nut on the drive side, install the rear derailleur guard over the
axle with the U-shaped guard pointing down, and retighten the axle nut.
The guard will sit between the frame and the axle nut.
Reflectors
Attach the white reflector to the front reflector bracket and secure the fork
using the hardware provided. Attach the red reflector to the rear reflector
bracket and secure to the frame or seat post, depending on the bracket
style, with the hardware provided.
Tighten both rear wheel axle nuts and the quick release
mechanism securely. Failure to do this may cause the
rear wheel to dislodge from the frame dropouts resulting
in serious damage or injury.
Saddle Bag
Frame Bag
Reflector
Reflector
Reflector
Water bottle and cage
Final Check
After all adjustments have been made, shift through every gear several times at
varying speeds. This will ensure all your adjustments are correct and will allow
you to pinpoint any trouble areas. If you encounter any problems, refer to the
appropriate section and make any necessary adjustments.
Check the tire pressure and inflate each tube to the recommended psi as
stated on the sidewall of the tire.
Check that the kickstand operates smoothly and the kickstand bolt is secured
tightly.
Finally, examine the bicycle. Make sure all accessories are attached and all
quick releases, nuts and bolts have been tightened securely.
Correct maintenance of your bicycle will ensure many years of happy riding.
Service your bicycle regularly by referring to the relevant sections of the
manual, OR take it to a professional bicycle shop.
Remember: Always wear helmet and obey all traffic laws.
Do not over-inflate the tires.