Operational Function
1. Power indicator light
2. Thermostatic control switch
3. Air outlet grill
4. Heat selection switch
Instructions for Use
1. Remove heater from its carton and unwind the cord to its full length.
2. Place the heater on a firm level surface in a stable upright position.
3. Make sur
e the function knob is turned to OFF “0”.
4. Plug the cable into a 220V AC power outlet. To avoid an electrical
circuit overload, be sure that no other appliances are plugged into the
same circuit with your heater.
Fan
•
Turn the fan on by turning the funct
ion knob to “
“ and rotating
the thermostat to the maximum position.
•
You can use the fan at any time during the year to circulate the air within
the room.
Heating
•
Turn the function knob to “I” for 1000w heat setting and “II” for 2000w
heat setting.
•
For greater economy use the 2000w heat setting initially and then switch
to the 1000w heat setting.
•
For the 1000w and 2000w heat settings the fan remains at the same
settings, only the elements used change to create the greater/lesser
heat flow.
Warning: DO NOT COVER
