infinitec POCKET TV, Быстрый старт, Страница: 7 / 9

EXPLORE YOUR AIR REMOTE:
1. When you first take your Air Remote out of the box, open the back
cover and remove the USB receiver. The back cover might be a little
difficult to open so be careful you don’t break a nail!
2. Place the cover back on the Air Remote.
3. Insert the USB receiver into the USB 2.0 input of the Pocket TV.
Note : If you wish to connect multiple USB peripherals to the Pocket
TV you can do so by using a small USB hub.
Note: The Air Remote’s battery is rechargeable and already comes
pre-charged so you can start using it immediately! Whenever
you need to recharge your remote simply connected the mini USB
power cable to the charging port or the Air Remote. The LED light on
the Air Remote will change color to indicate that it’s fully charged.
Motion Detection:
If you wish to switch off the motion detection while typing simply
click the mouse on/off button. To turn it back on click it again and
you’re ready to go!
Switching Modes:
The Air Remote can be used with two hands in landscape mode or
with one hand in portrait mode. To switch between these click the
‘switch remote orientation’ button on the bottom left corner.
Pair to USB Receiver:
This option is to be used only in case of loss or replacement of the
USB receiver that comes with your Air Remote. If you have received
a new USB receiver follow these steps to pair it to your Air Remote:
1. Plug the new USB receiver it into the USB 2.0 input port of the
Pocket TV.
2. Press the RF button on your Air Remote and pairing will occur
automatically.
LET’S GET STARTED!
The only thing left to do now is to power up your Pocket TV. Follow
these steps and you’ll be up and running in no time:
1. Connect the USB power cable to the power adapter
2. Connect the adapter to the nearest power supply.
Note: if you are in the US, use the US/EUR power converter along
with the power adapter
3. Connect the micro USB side of the power cable into the micro USB
port of the Pocket TV.
4. You will see the Power-on LED light turn blue. This means you
have successfully switched on your Pocket TV.
Note : You can supply power to the Pocket TV by directly connecting
the USB power cable to a USB port on your TV instead of using the
power supply. However, this is not always recommended since the
power source from your TV may not be optimal to power-up and run
the Pocket TV properly.
HDMI
USB PORT