110K(i) 50 Hz Power Conditioner | Owners Manual
14
BYPASS SWITCH
**** CAUTION ****
Prior to switching from one position to another- turn off the AC input breaker.
The manual bypass switch is a break before make switch located on the Series 700A/VS. The manual
bypass switch is used to bypass all power electronics in case of failure.
NORMAL MODE
With the switch in the normal position, the Series 700A/VS will provide clean and regulated power to the
critical loads. The Series 700A/VS should have the switch in the normal position unless a failure has
occurred.
BYPASS MODE
With the switch in the bypass position, the Series 700A/VS will provide clean power to the critical loads.
In the bypass position, the unit will not regulate the incoming voltage. The Series 700A/VS should be
placed in the bypass position when a failure of the system has occurred. This provides the user with some
protection until a service technician arrives.
REMOTE EMERGENCY POWER OFF (REPO) OPTION
The REPO is operated by a remote push button that when depressed will shunt trip the Series 700A/VS
input breaker and disable the unit. This option may be added to units in the field.
Contact the Customer Support Department if you wish to add this option.
Содержание Transtector 700 A/VS Series
Страница 21: ...21 1402 001 APPENDIX A RELATIVE DRAWINGS SCHEMATICS...
Страница 27: ...27 1402 001 NOTES...
Страница 28: ......