Infinite Response VAX77, Руководство пользователя

Страница: 59 / 96

Chapter 4: Library Mode & Host Control
59
to where the individual MIDI channels are routed; it
may be necessary to specify or filter incoming MIDI
channels on any sound source receiving Port 1 to
avoid simultaneous triggering. If your Port 1 MIDI
unit is multi-timbral, it might be helpful to assign
MainStage to Ports 2-4 only (MIDI channel setup page
#s 17-64).
*One alternate to this approach would be to remain in
Host Control with MainStage, but have the additional
MIDI sound sources daisy-chained from the Mac, and
hence, controlled from MainStage.
To use with DAWs : If you‟re using the VAX to play
plug-ins from a track-based digital audio workstation
or host,
Channel Selector mode (the initial screen
within Host Control) may be an effective means of
control. While in Channel Selector, the blue and
green buttons on the front panel are available to
serve as up/down track selectors – this is generally
implemented by the „Learn‟ function on most DAWs,
from the Key Commands. The blue and green VAX
buttons would need to be „learned‟ to the Previous
Track/Next Track functions, commonly the up & down
cursor buttons. Once implemented in this manner,
you can easily move from track to track with the VAX
front panel buttons, and then on a specific track you
can choose to play from any of the 16 MIDI channels
(from the Channel Selector mode on the touchscreen).
Most plug-ins will be preset to run on MIDI channel 1
only, but in the case of a multi-timbral plug-in,
Channel Selector will give you quick access to sounds
on each channel.