Infinite Play Next Z7000, Инструкция по установке и эксплуатации

Страница: 2 / 20

2
EN
next
H= 145-150 cm
7”
VIDEO DOOR PHONE INSTALLATION ART. Z7000 - Z7100
Installing from semi-surface mounted:
Install the monitor away from sources light and heat.
Install the flush-mounted back box type:
Vimar V71303 - V71318
ELVOX 6149
Bticino 503E (horizontal - vertical) – 506E
on the wall at a height of approximately 1.45 m from the floor to the lower
edge, as indicated in the figure.
Carry out the wiring according to the wiring diagrams.
Staying the video in the following way: put the monitor on the attachment
plate holding it slightly raised at this point by holding down the front make
a slight downward pressure
Remove the protective film from the display.
Should it be necessary to remove the video you need to lift (from bottom
to top) the video frame by pressing the hook.
Description connection terminal block:
2 - Line video with RJ45 connector
PW+ - Input for additional 12V power supply (if required)
PW- - Mass supplementary feeding
FP-Connection for door call button with reference to M
AL - General alarm apartment with reference to M
P - Panic button user with respect to M
M - Mass
CH1 - Relay additional chime
CH2 – Relay additional chime
USB
Technical characteristics:
• Semi-surface mounted of ABS, glass parts are made from ultra-strong,
scratch-proof.
• Ready for installation by Semi-surface mounted with metal coupling
• LCD 7 "capacitive touch screen
• Video Signal WVGA 800X480 Cr 500
• Camera 2Mpx with Art Z7100
• PoE alimentation
• Standby power consumption 7 mA, in conversation: 150mA
• Operating Temperature: 0 ° to 40 ° C
• Electronic chime
• Input for door call.
• Size: 189x119x21 mm
Maintenance:
Clean the monitor using a soft cloth, which can be dry or slightly
dampened with water. Do not pour water directly onto the screen and do
not use any type of chemical product.