USER MANUAL |
16
FEATURE – RFID CARDS
Reading RFID Cards
The Infinea TAB 4 has a built-in RFID tag/card reader. The RFID reader
incorporates several RFID format depending on the model of your Infinea TAB
4.
To Read/Write to RFID tag/cards will require special software not included
with the Infinea TAB 4.
The RFID receiver/transmitter is located adjacent to the left scan button. Place
the RFID tag/card over the receiver/transmitter as shown in the figure below.
Keep the face of the tag/card flat with the receiver/transmitter as close as
possible.
Tips:
Depending on the type of RFID tags/cards being used, it may be necessary for
tags/cards to make direct contact with the surface where the RFID
receiver/transmitter is located for proper reading/writing.
