Infinique INO227X-AWT, Руководство пользователя

Страница: 42 / 50

Infinique High Speed Dome Manual
42
OPERATION & PROGRAMMING
DOME : SCAN
This function allows the user to move between 2 points repeatedly.
When scan function runs, camera moves from the 1st point to the 2
nd
point and vice versa.
(The direction of the path is chosen by the user)
To program a scan:
1. Press the MENU key.
2. Select DOME and select SCAN using the joystick.
3. Use the joystick to position the cursor beside NO.xxx.
Move left or right to select a scan number.
4. Press the [TELE]key or twist the joystick clockwise to
setup start and stop positions.
5. Edit a title. Refer to [TITLE EDIT] section in this manual.
(Please see the page 24)
To clear a scan :
1. Use the joystick to position the cursor beside NO.xxx. Move the
j oystick left or right to select a scan number.
2. Press the[WIDE] key or twist the joystick counterclockwise
To activate a scan:
Press the specific number key and then press [SCAN].
Ex) [1]+[SCAN]
You can also access this menu using [SCAN] key.
Note
- Press [ENT] or [IRIS OPEN] key to save settings and exit to previous menu or
Press [ESC] or [IRIS CLOSE] key to go to pervious menu without saving any
settings at any time .
OPERAION & PROGAMMING