Infinique INO227X-AWT, Руководство пользователя

Страница: 26 / 50

Infinique High Speed Dome Manual
26
OPERATION & PROGRAMMING
Check points before operation
Before power is supplied , please check the cable carefully.
The camera ID of the controller must be identical to that of the target camera. The
camera ID can be checked by reading address switch of the camera.
If your controller supports multi-protocols, the protocol must be changed to match to
that of the camera.
If you change camera ID by changing address switch, the change will be effective
after you reboot the camera.
Since each controller has different operation method, refer to the manual for your
controller if camera can not be controlled properly. The operation of this manual is
based on the standard pelco controller.
NOTE
1. Version can be changed by system upgrade.
2. This manual is written by using supplied controller.
3. Temperature can be changed by outside environment.