Infinique INO227X-AWT, Руководство пользователя

Страница: 37 / 50

Infinique High Speed Dome Manual
37
OPERATION & PROGRAMMING
DOME : MOTION
PROPORTIONAL PAN/TILT
Proportional pan/tilt automatically reduces or increases the
speed of the pan and tilt according to zoom ratio.
There are two proportional pan/tilt modes:
ON(default): Enables the proportional pan/tilt mode.
OFF: Disables proportional pan/tilt mode.
AUTO FLIP
In case tilt angle arrives at the top of tilt orbit (90°),
camera module turns on its axis by 180° at the top
of tilt orbit and moves to opposite tilt direction (180°) to
k eep tracing targets.
ON (default) :Auto flip mode is enabled.
OFF : Auto flip mode is disabled.
OVER TILT
Over tilt is to prevent horizontal view from the trim ring or ceiling.
ON : Minimum Tilt Angle is -1.8 degree.
OFF : Minimum Tilt Angle is 4.5 degree.
AZIMUTH ZERO
Azimuth zero is the pan angle from 0° to 365°. Azimuth zero
is the pan po sition the user specifies the 0° point. Azimuth zero
is normally set to Magnetic north. Once set, azimuth is based
on the set Azimuth zero point.
Limit STOP