Infinique Hybrid AHD DVR Скачать руководство пользователя страница 113

Страница: 113 / 163

Hybrid DVR User Manual

TEC-VS-219-1905-V01

Select a day on the calendar to search for recordings from. Days with recordings appear with a
red underline.

Select the recording type to search for from the dropdown next to

Type

, or select

All

to search

for all recordings.

To choose the video stream to search and play. To play Substream recordings, make sure the DVR
has been set to record with Dualstream

Check the channels to search for recordings from. Check

Synchronous playback

to play all

channels at once.

Click

Search

Recordings that fit the search criteria will be displayed in the timeline. Click a section of video to
begin playback and click the

play button.

13.4.3 Playback Control Buttons

Play the recordings

Pause

Stop

Go Forward One Frame: Move frame-by-frame through playback. Available when the

synchronous playback option is not checked.

Click on one of the channels which are being played and then click record button to record

current video to the computer. Click again to stop recording.

Click on one of the channels which are being played and then click capture button to take a

snapshot and save to the computer.

Download menu, used for downloading multiple video recordings.

Содержание Hybrid AHD DVR




































































































































































Результаты поиска

Содержание Hybrid AHD DVR

Отзывы:

Infinique Hybrid AHD DVR, Быстрое руководство по установке, Страница: 113 / 163

Результаты поиска

Содержание Hybrid AHD DVR

Отзывы: