InfiNet Wireless Quanta 5, Техническое руководство пользователя

Страница: 80 / 100

Quanta 5
Quanta 5 Technical User Manual
80
Parameter Description
Start
Frequency
Set the first frequency for scanning (in MHz).
Stop
Frequency
Set the last frequency for scanning (in MHz).
Scan step
Set the scanning frequency step (in MHz).
It is recommended to set 1 MHz “ ” value to get more precise
step
scanning results.
Channel width
Set the bandwidth (in MHz).
Scan Duration
Set the time period for the scanning process (in seconds).
After the end of this time period, scanning is stopped and the radio
interface will be back to its normal mode operation.
Estimated
scan time
Estimated scan duration.
Table - Spectrum analyzer parameters
Click on "Start scanning" button to start scanning. You may stop scanning by clicking on
appropriate button.
By clicking the "Last Snapshot button, you get the final scanning results. The most common "
usage of this feature is when you perform a spectrum scan at the remote unit on the other side
of the wireless link. When running a spectrum scan at such a unit (accessible via the RF
interface), connection to this unit will be lost for a scan time. " " option allows Last Snapshot
viewing scan results when the connection gets up again.