InfiNet Wireless Quanta 5, Техническое руководство пользователя

Страница: 44 / 100

Quanta 5
Quanta 5 Technical User Manual
44
1.
2.
3.
4.
5.
6.
7.
8.
9.
6.3.2 Quanta 5 Installation Pro cedure
In case of device with external antenna. Prepare RF cables of the required length,
recommended maximal length is 1 meter. Install and isolate the connectors on the RF
cable.
Install ODU connector facing down using the MONT-KIT-85. Do not tighten the fasteners
to the end until the alignment is completed.
Connect the Cat5e FTP cable with the cable gland to ODU.
Perform ODU grounding.
Lay the Cat5e FTP cable from ODU to the power supply.
Connect the Cat5e FTP cable with a shielded connector covered by a cap to the "OUT"
port of the power supply, having previously touched the power supply connector case
with FTP cable connector case.
Perform the power supply grounding.
Connect the laptop using Cat5e FTP cable to the power supply "IN" port.
Connect the power cord to the power supply and then to the power circuit.
Make sure a small loop (at least 10 cable diameters) is provided before the Cat5e FTP cable
enter into the building.
CAUTION
In order to prevent device damage make sure that antenna is connected to
both N-type connectors with . serviceable RF cables before switching on
CAUTION
Use mains supply cords that adhere to safety regulations of the country
where the equipment is getting deployed.