Application Note
4
Rev. 1.0
2017-08-02
TLE5014 Programmer
General description
1.1
Sensor connection
The shield has to be plugged onto the Boot Kit. Care has to be taken that the correct pins are connected.
The TLE5014 can be connected via a cable to the shield.
Three connections are required:
• VDD
• I/O
• GND
The shield supports two sensors with separated connectors.
Figure 3
TLE5014 sensor connection
Care has to be taken that all pins of the TLE5014 are connected according to the TLE5014 datasheet.
TLE5014
connection
