Application Note
10
Rev. 1.0
2017-08-02
TLE5014 Programmer
Programming
3.3
User menu
Click on the Sensor menu and select one of the following options:
3.3.1
EEPROM Register
Select Sensor > EEPROM Register in the menu bar on the top to display the EEPROM register mapping.
Click on the register in the left column to highlight the register and to display the content on the right.
•
•
•
•
Button
Description
Read EEPROM
Read the current EEPROM values and update the displayed EEPROM content.
A register content can be modified by editing the value on the right either in a
hexadecimal or a decimal value and pressing RETURN.
Burn EEPROM
Burn the displayed content to the TLE5014 EEPROM.
A successfully EEPROM burning is indicated with a “Burn successful!” message.
Note:
Care has to be taken not to modify EEPROM registers which change the
sensor configuration. This could result in a wrong function of the device.
Browse LUT
Browse for a .txt file which contains the values intended to be used in the look-up
table. See
for more details.
Note:
After re-loading LUT values (Browse LUT) or EEPROM content (Load Config)
the EEPROM has to be burned by pressing Burn EEPROM.
