2
Safety precautions
Note:
Please note the following warnings regarding the hazards associated with development systems.
Figure 3
Safety Precautions
•
Warning: Remove or disconnect power from the drive before you disconnect or reconnect wires, or
perform maintenance work. Failure to do so may result in personal injury or death.
•
Warning: Do not keep the programmer connected to the laptop while the board is in use in an inverter. The
laptop may be damaged during the operation of the system.
•
Caution: Only personnel familiar with the drive, power electronics and associated machinery should plan,
install, commission and subsequently service the system. Failure to comply may result in personal injury
and/or equipment damage.
•
Caution: The programmer board contains parts and assemblies sensitive to electrostatic discharge (ESD).
Electrostatic control precautions are required when installing, testing, servicing or repairing the assembly.
Component damage may result if ESD control procedures are not followed. If you are not familiar with
electrostatic control procedures, refer to the applicable ESD protection handbooks and guidelines.
•
Caution: A drive that is incorrectly applied or installed can lead to component damage or reduction in
product lifetime. Wiring or application errors such as undersizing the motor, supplying an incorrect or
inadequate AC supply, or excessive ambient temperatures may result in system malfunction.
•
Caution: The programmer board is shipped with packing materials that need to be removed prior to
installation. Failure to remove all packing materials that are unnecessary for system installation may result
in overheating or abnormal operating conditions.
TLE4972 Current sensor programmer
User guide
2 Safety precautions
User guide
6
Rev. 1.00
2022-04-05
