4.2.5
Options drop down menu
4.2.5.1
EXT EEPROM
This menu item is used to fetch the information from the external EEPROM of the Infineon's evaluation boards.
The figure below shows the dialog box that will pop up if user selects the menu item "EXT EEPROM" under
the "Options" menu. If there is no external EEPROM available on the DUT board connected to the programmer
board this menu item will not appear in the "Options" menu dropdown list.
Figure 16
EXT EEPROM menu item
The following information are programmed in the external EEPROM:
•
PCB Timestamp: related to evaluation board hardware release;
•
Sensor Short Name: family name of the current sensors on the evaluation board;
•
Sensor Long Name: complete product name of the current sensors on the evaluation board;
•
Sensor to Output Mapping: 0 is default. It defines the mapping of the three sensors on the evaluation board
with acquisition channels in the programmer board (Sensor 1, Sensor 2 and Sensor 3);
TLE4972 Current sensor programmer
User guide
4 System and functional description
User guide
22
Rev. 1.00
2022-04-05
