Singlestone
PBA 313 07
Preliminary Product Overview
4/2004
22
5 Type approvals and Qualification
5.1 Bluetooth Qualification
The PBA 31307 is Bluetooth Qualified according to specification v1.1 with the ID: PBA31307. The
covered functionality of this listing covers RF, Baseband and Link Manager.
Since the PBA 31307 constitute a complete Bluetooth system, the pre-testing, listings and
qualifications can be reused by reference by the end-customer.
Please refer to the application note “PBA 31307 Bluetooth Qualification & Type Approval” for the
details on the procedure to re-using the BT-qualification.
5.2 FCC Modular Approval
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
The modular transmitter is labeled with its own FCC ID number, but, if the FCC ID is not visible when
the module is installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. The exterior label can use wording
such as the following: “Contains Transmitter Module FCC ID Q2331307” or “Contains FCC ID
Q2331307”. Any similar wording that expresses the same meaning may be used.
When reusing the Modular Approval, antenna related measurements might need to be redone. The
antenna used for modular approval was a max 1.6dBi half-wave antenna from gigAnt (PCB Swivel
6076019). When using an other antenna a class II permissive change will be needed.
For further details on the procedure for re-using the FCC type approval, please refer to the application
note “PBA 31307 Bluetooth Qualification & Type Approval”.
5.3 R&TTE Approval
This device complies with the requirements in the European Union and EFTA according to the
following test specifications:
EN 300 328
EN 301 489 -1/17
The R&TTE approval for the PBA31307 - device is valid in the following countries:
Austria, Belgium, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and
United Kingdom.
The notification time for these countries to request additional testing and/or documentation are 4
weeks.
