User Manual
7 of 45
Revision 1.0
2019-09-17
EVAL-M3-IM564 User Manual
iMOTION
™
Modular Application Design Kit
EVAL-M3-IM564 main features
3.1
EVAL-M3- IM564 board specifications
Table 2 depicts the important specifications of the Evaluation board EVAL-M3-IM564.
Table 2
EVAL-M3-IM564 board specifications
Parameters
Values
Conditions / comments
Input
Voltage
165 - 265 V
rms
lower AC input, less motor power output
Input current
9.6 A
rms
input 220 V
AC
, T
a
=25
C, IM564-X6D/IM564-
X6DS
Output
Power (3phases)
2000 W
input 220V
AC
, f
PWM
= 8 kHz, T
a
=25°C, T
h
=80°C
Current per leg
7.8 A
rms
input 220V
AC
, f
PWM
= 8 kHz, T
a
=25°C, T
h
=80°C
DC Bus Voltage
Maximum DC bus voltage
420 V
Minimum DC bus voltage
120 V
Switching Frequency
PFC switching frequency f
PFC
50 kHz (max)
Limited by controller board EVAL-M3-102T
Inverter switching frequency
f
PWM
20 kHz (max)
Current feedback
PFC current sensing resistor
5 m
Ω
RS3 is fit, RS4 is for optional.
Inverter current sensing resistor 5 m
Ω
RS6 is fit, RS5 is for optional.
Protections
PFC Gatekill protection level
36.67 A
peak
Configured by either PFC current sensing
resistor RS3/RS4, or adapting comparator
threshold divider resistor R4.
Output current trip level
1
25 A
peak
Configured by changing shunt resistor
RS5/RS6, ITRIP positive going threshold is
about 470mV. Or comparator R30/R31.
Temperature trip level
100 °C
For controller board EVAL-M3-102T
On board power supply
15 V
15 V ± 5 %, max. 1A
Used for CIPOS
™
IPM gate driver & cooling fan
3.3 V
3.3 V ± 2 %, max. 20 mA
Supplying the 3.3V to the controller board and
protection circuits
PCB characteristics
Material
FR4, 1.6mm thickness, 2
layers.
35 µm copper thickness
Dimension
148 mm × 165 mm
System environment
Ambient temperature
From 0 to 50°C
Non-condensing, maximum RH of 95 %
1
For iMOTION
™
IC IMC1xx, there are three types of Gatekill Input Source (Refer to section 5.2.3 or control board user manual for
detail). Please note that, if select comparator for Gatekill Input Source, the external Gatekill signal will be not used. And the signal
I_Shunt will be compared by the internal comparator with the “Gatekill Comparator Reference” value set in MCEWizard only.