Infineon EVALM3IM564TOBO1, Руководство пользователя, Страница: 10 / 45

User Manual 10 of 45 Revision 1.0
2019-09-17
EVAL-M3-IM564 User Manual
iMOTION ™ Modular Application Design Kit
EVAL-M3-IM564 main features
Table 5 provides the pin assignments of the 30 pins iMOTION ™ MADK-M3 interface connector J3. This connector
is the interface to the controller board.
Table 5 J3 - iMOTION ™ MADK-M3 30 pin interface connector for controller board
Pin Name Pin Name Connectors
1 PWMUH 3.3 V compatible logic input for high side gate driver-Phase U
2 GND Ground
3 PWMUL 3.3 V compatible logic input for low side gate driver-Phase U
4 GND 4 GND Ground
5 PWMVH 3.3 V compatible logic input for high side gate driver-Phase V
6 +3.3V On board 3.3 V supply
7 PWMVL 3.3 V compatible logic input for low side gate driver-Phase V
8 +3.3V On board 3.3 V supply
9 PWMWH 3.3 V compatible logic input for high side gate driver-Phase W
10 I_U Positive Current sense output
11 PWMWL 3.3 V compatible logic input for low side gate driver-Phase W
12 I_U- Negative current sense output or Ground
13 GK Gate kill signal – active low when overcurrent is detected
14 DCBSense DC bus positive voltage, scaled in 0-3.3 V range by a voltage divider
15 VTH Thermistor Output
16 I_V Not used
17 I_V- Not used
18 I_W Not used
19 I_W- Not used
20 VCC 15 V Power Supply
21 PFCG0 3.3 V compatible logic input for PFC gate driver IC
22 GND Ground
23 PFCG1 Not used
24 +3.3V On board 3.3 V supply
25 PFCGK PFC Gate kill signal – active low when PFC overcurrent is detected
26 DCBSense DC bus positive voltage, scaled in 0-3.3 V range by a voltage divider
27 VAC+ AC voltage sensing positive cycle
28 VAC- AC voltage sensing negative cycle
29 IPFC+ PFC current sensing positive
30 IPFC- PFC current sensing negative